Model-specific cautions
This entry is for DishStar LT without the LT-H heater option. The 2026 manual has a separate LT-H electrical table; those figures are deliberately not merged here.
Manufacturer documents say electrical figures are reference values and direct the installer to the actual data plate. The merchant's dimensions are not the source of these dimensions.
What the inspected documents say
- Published supply
- 115 V,60 Hz, single-phase
Read manufacturer source ↗ - Running load
- LT: 10 A total load in the 2026 manual
Read manufacturer source ↗ - Supply circuit
- Not specified as a breaker recommendation in the inspected electrical table. Installer must determine it.
Read manufacturer source ↗ - Wiring
- L1, neutral and ground in the 2026 manual diagram
Read manufacturer source ↗ - Nominal frame
- 24.25 in wide ×25 in deep ×33-5/16 in high. Manual notes 1 in foot adjustment.
Read manufacturer source ↗ - Dish opening
- 14.25 in clearance
Read manufacturer source ↗ - Drain limit
- Not confirmed for LT here. The inspected manual dimension drawing is marked HT shown.
Read manufacturer source ↗ - Incoming hot water
- 120°F minimum for the LT in the 2026 manual parameter table
Read manufacturer source ↗
Owning source documents
Read the full current documents, not only this summary. A source-read date is not a manufacturer confirmation for your serial number.
- Jackson current DishStar LT product pagehttps://www.jacksonwws.com/products/dishstar-lt-undercounter/
- Jackson DishStar HT/LT/LT-H manual, revisionU, June 4, 2026https://www.jacksonwws.com/wp-content/uploads/2016/08/DishStar-Manual.pdf
What this entry does not establish
Current inventory, quoted configuration, delivered cost, installation approval, local ventilation requirements, current certification, and your building's capacity are not established here. No price or dealer specification database is copied into this comparison.