Model-specific cautions
The 2024 specification lists 208/240 V, while the 2023 manual describes 230 V and a 220-240 V rating. This comparison does not decide which configuration you will receive.
Before purchase, have the seller and installer identify the exact voltage, data plate and applicable manual. Published voltage filters are not compatibility approval.
What the inspected documents say
- Published supply
- 2024 spec: 208 V or 240 V, single-phase
Read manufacturer source ↗ - Running load
- 2024 spec: 27 A at 208 V; 30 A at 240 V
Read manufacturer source ↗ - Supply circuit
- Not resolved in this comparison. Do not size a breaker from the running-load figures.
Read manufacturer source ↗ - Wiring
- 2023 manual: two power wires plus ground, hardwired. Current-configuration confirmation needed.
Read manufacturer source ↗ - Nominal frame
- 23-7/16 in wide ×24 in deep ×33-5/16 in high
Read manufacturer source ↗ - Dish opening
- 13 in maximum ware clearance
Read manufacturer source ↗ - Drain limit
- 2023 manual: hose no higher than 31 in. Confirm for the delivered configuration.
Read manufacturer source ↗ - Incoming hot water
- 140°F in both inspected documents
Read manufacturer source ↗
Owning source documents
Read the full current documents, not only this summary. A source-read date is not a manufacturer confirmation for your serial number.
- CMA current UC50e product pagehttps://cmadishmachines.com/product/model-uc50e/
- CMA UC50e specification, September 2024https://cmadishmachines.com/wp-content/uploads/2020/02/UC-50e_Spec_Sheet_09-2024.pdf
- CMA UC50e manual, revision 1.02B, January 1, 2023https://cmadishmachines.com/wp-content/uploads/2020/02/UC_50e_Owner_Manual_Rev_102B_01-01-2023.pdf
What this entry does not establish
Current inventory, quoted configuration, delivered cost, installation approval, local ventilation requirements, current certification, and your building's capacity are not established here. No price or dealer specification database is copied into this comparison.