Model-specific cautions
The 2019 manual gives a 33.75 in frame height and covers an optional sustainer heater. The currently linked specification gives a 33.25-34.25 in height range and discusses a version without tank heaters.
Do not apply one option's electrical or height numbers to a differently configured quote. The exact heater option and machine data plate must be checked before ordering.
What the inspected documents say
- Published supply
- 2024 spec: 115 V
Read manufacturer source ↗ - Running load
- 2024 spec: 16 A; older manual: 15.8 A
Read manufacturer source ↗ - Supply circuit
- 2019 manual calls for 20 A. Applicability to the quoted heater option is not resolved here.
Read manufacturer source ↗ - Wiring
- Not resolved for the exact ordered option.
Read manufacturer source ↗ - Nominal frame
- 2024 spec: 24 in wide ×23.5 in deep; height 33.25-34.25 in
Read manufacturer source ↗ - Dish opening
- 16 in maximum ware clearance
Read manufacturer source ↗ - Drain limit
- Pumped drain on current product page; maximum connection height not resolved here.
Read manufacturer source ↗ - Incoming hot water
- Minimum 120°F; recommended 140°F in current spec
Read manufacturer source ↗
Owning source documents
Read the full current documents, not only this summary. A source-read date is not a manufacturer confirmation for your serial number.
- CMA current L-1X16 product pagehttps://cmadishmachines.com/product/model-l-1x16/
- CMA L-1X16 specification, September 2024https://cmadishmachines.com/wp-content/uploads/2020/02/L-1X16_Spec_Sheet_07-2022-1.pdf
- CMA L1X/L-1X16 manual, revision 1.17, June 27, 2019https://cmadishmachines.com/wp-content/uploads/2020/02/L-1X_L-1X16_Owner_Manual_Rev_117_20190627-1.pdf
What this entry does not establish
Current inventory, quoted configuration, delivered cost, installation approval, local ventilation requirements, current certification, and your building's capacity are not established here. No price or dealer specification database is copied into this comparison.